waste-incinerator - HICLOVER Incinerator

Effect of biomedical waste on human health

Posted on August 23, 2021 by admin

Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/

Email: [email protected]
Email: [email protected]

Nanjing Clover Medical Technology Co.,Ltd.


Equipment Technical Specifications	Model
TS30S	Picture
	Feed Capacity
78 Liters for Main chamber	Burning Rate
Typical 30 kgs Each hour	Burning Time Each Feed
0.5 hour	Voltage
220V	Power
0.5Kw	Gas
Diesel oil	Burner
Diesel Oil Burner, 2 sets	Feed Mode
Manual	Fuel consumption (Oil)
Typical 8 Kgs/Hour	External Dimensions
90 x 90 x 150cm (main body)	Internal Dimensions
Dia.50 x 40cm(Primary Chamber)	Waste combustion chamber
78Liters	Article Combustion Chamber
50Liters	Oil Tank Capacity
100 Liters	Door Opening
25 x 25cm	Chimney
3.0M	Gross Weight
1200kgs	Chamber Material
Refractory Concrete	Max.
80,000Kcal/Hr.
Operation Technical Specifications	Chamber fever
8000C -10000C	Chamber Anti-Rate
13500C	Residency time
0.5 Sec.	Burning efficiency
＞98 percent	Waste Lower Calorific Power

ways of disposing solid waste

3000Kcal	HICLOVER Incinerator/Parts Range
Main Feature	Medical Waste Incinerators
HICLOVER 10-500kgs/Hr.Double Combustion Chambers	Single Combustion Chamber
Small, Cheap,10-20kgs/Hr.	Three Combustion Chambers(Optional)
3 Ranked for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment

For additional animal incineration

consequence of biomedical waste on human health

	Items/Model	TS100(PLC)	TS150(PLC)	TS300(PLC)
TS500(PLC)	Burn Speed (Average)	100 kg/hour	150 kg/hour	300 kg/hour
500 kg/hour	Control Mode	PLC Auto.	PLC Auto.	PLC Auto.
Combustion Chamber	1200L	1500L	2000L	3000L
Internal Dimensions	120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm
Secondary Chamber	600L	750L	1000L	1500L
Smoke Filter Chamber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber
Feed Mode	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V
Power	1.38Kw	1.69Kw	2.57Kw	4.88Kw
Diesel Oil Consumption (kg/hour)	Ave.20.4	Ave.24.2	Ave.33	Ave.44
Natural Gas Consumption (m3n/hour)	Ave.24.5	Ave.29	Ave.39.6	Ave.52.8
Infection Monitor	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes
Oil Tank	200L	300L	500L	500L
Chimney	10Meter	10Meter	14Meter	14Meter
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
1st. Chamber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chamber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	6000kg	8500kg	11000kg	16000kg
External Dimensions	260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm

The incinerator units shall include a temperature based electronic combustion control system that utilizes temperature and other data to inform automated or programmed cycling through the standard burn cycle: pre-heat, burn with waste addition, burn completion, cool-down. The system shall be capable of varying auxiliary fuel and air supply in both combustion chambers to achieve optimum combustion conditions. As far as practicable, the incinerator shall be of a plug and play type for ease of installation and commissioning in remote locations.

“The control system shall have a separate push button-based work station, which shall be located adjacent to the loading bay and protected from weather and impact damage. The system shall allow for rapid and straightforward intervention by the operator if the automatic system is not achieving the desired results during a burn cycle.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room2021-02-21

Dead Pet Cremation Equipment

Posted on August 23, 2021 by admin

Product Description

Nanjing Clover Medical Technology Co., Ltd..

Items	Specification
YDC Model	YD-10C / YD-20C / YD-30C / YD-50C
Main Product List	Primary Combustion Chamber
	Secondary Combustion Chamber
	Mix Combustion Chamber
	Smoke Filter Chamber
	Incinerator Common Control Case
	Stainless Steel Chimney
	Italy oil/gas burner: 02 units
	Oil Tank (if oil fuel)

Key Features: * All versions with Dual combustion chamber. * Stainless Steel chimney/stack, long life. *according to sequence * High fever, long life of incinerator. * Free or minimal installation on site. * High burn rate, from 10kgs to 500kgs per hour, up to 6ton per day. * PLC Control Plane. *according to order * New Design for pet animal cremation business. * One year warranty on incinerator and parts in stock.

Nanjing Clover Medical Technology

Posted on August 23, 2021 by admin

Basic Info.

Model NO.:medical waste incinerators manufacturers in china

Pullution Sources:Solid Waste Processing

Processing Methods:Combustion

Export Markets:Global

Product Description

Items/Model	TS10(PLC)	TS20(PLC)	TS30(PLC)	TS50(PLC)	TS100(PLC)
Burn Rate	10 kg/hour	20 kg/hour	30 kg/hour	50 kg/hour	100 kg/hour
Feed Capacity	20kg	40kg	60kg	100kg	200 kg
Control Mode	PLC	PLC	PLC	PLC	PLC
Combustion Chamber	100L	210L	330L	560L	1200L
Internal Dimensions	50x50x40cm	65x65x50cm	75x75x60cm	100x80x70cm	120x100x100cm
Secondary Chamber	50L	110L	180L	280L	600L
Smoke Filter Chamber	Yes	Yes	Yes	Yes	Yes
Feed Mode	Manual	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V	220V
Power	0.5Kw	0.5Kw	0.5Kw	0.7Kw	0.7Kw
Oil Consumption (kg/hour)	5.4–12.6	7.8–16.3	10.2–20	12.1–24	14–28
Gas Consumption (m3/hour)	6.2–11.4	8–15.7	9.8–20	9.9–26.1	10–32.2
Temperature Monitor	Yes	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes	Yes
Oil Tank	100L	100L	100L	100L	200L
Feed Door	30x30cm	45x40cm	55x50cm	70x55cm	80x60cm
Chimney	3Meter	3Meter	5Meter	5Meter	10Meter
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	1500kg	2200kg	3000kg	4500kg	6000kg
External Dimensions	140x90x120cm	160x110x130cm	175x120x140cm	230x130x155cm	260x150x180cm

pet cremation equipment prices

Posted on August 22, 2021 by admin

All kindly pets owners hope their lovely dog or cat be in heaven after they leave us. We understand the special bond between pet and owner and believe that it should never be forgotten. Losing a pet can be devastating and we built our business so families can remember their pets forever. pet cremation equipment prices firstly according to small pet or big pet, then small incinerator for cats and small dog or big dogs.
The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation business owner all over the world.

Animal diseases, new virus strains and spread of infectious diseases are only few of the consequences of improper animal waste treatment. Incineration is the way forward for Bio-secure waste disposal. Modern incineration is recognized as a most efficient solution for significant risk reduction in animal waste management.

Items/Model	A360	A600	A900	A1200
Burning Rate *animal	20 kgs/Hr.	20 kgs/Hr.	30 kgs/Hr.	60 kgs/Hr.
Feed Capacity *animal	30 kgs	50 kgs	80 kgs	100 kgs
Equipment Weight	2300 kgs	3000 kgs	4000 kgs	4300 kgs
Primary Chamber (Liters)	360	600	900	1200
Secondary Chamber (Liters)	200	200	300	500
External Dimensions (cm)	145x90x175	175 x 100 x 180	200x160x230	220x180x360
Internal Dimensions (cm)	100x60x60	130 x 70 x 65	120x90x85	130x100x90
Oil Tank(Liters)	200	200	300	300
Door Opening (cm)	48 x 60	50 x 60	62 x 80	55 x 80
Chimney (M)	5	5	5	10
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Secondary Chamber	YES	YES	YES	YES
Mix-Combustion Chamber	YES	YES	YES	YES
Smoke Filter Chamber	YES	YES	YES	YES
Combustion Fuel	Oil/Gas	Oil/Gas	Oil/Gas	Oil/Gas
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Temperature Monitoring	YES	YES	YES	YES
1st. Chmaber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chmaber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃

Pet Cremation

Posted on August 22, 2021 by admin

Product Description

Nanjing Clover Medical Technology Co., Ltd..

Items	Specification
YDC Model	YD-10C / YD-20C / YD-30C / YD-50C
Main Product List	Primary Combustion Chamber
	Secondary Combustion Chamber
	Mix Combustion Chamber
	Smoke Filter Chamber
	Incinerator Common Control Case
	Stainless Steel Chimney
	Italy oil/gas burner: 02 units
	Oil Tank (if oil fuel)

Application Scope: 1. Hospital& clinic: Iatric Waste, Infectious Waste, Dressing, Bio-Waste, Medicine. 2. 3. Community & Sea Port & Station: Municipal Solid Waste, etc. 4. Laboratories, Remote Locations, Disaster Relief Operations, Animal Cremation

Treatment and disposal technologies for health care waste

Posted on August 22, 2021 by admin

Items/Model

TS75

Picture

Principle

Solid Waste Incineration

Burn Rate

Average 75 kg/hour

Feed Capacity

Average 100kg

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

600L

Internal Dimensions

100x60x100cm

Secondary Chamber

300L

Smoke Filter Chamber

Yes

Feed Mode

Manual

Voltage

220V

Power

3.0Kw

Oil Consumption (L/Hour)

15-20

Natural Gas Consumption (m3n/hour)

**

Temperature Monitor

Digital Screen

Temperature Protection

Yes

Oil Tank

250L

Feed Door

Dia.55cm

Chimney

6 Meters

Chimney Sort

Stainless Steel

1st.

800℃–1000℃

2nd.

Gross Weight

2500kg

External Dimensions

2080x1100x3840cm(without chimney)

HICLOVER Incinerator/Parts Range

Main Feature

Medical Waste Incinerators	HICLOVER 10-500kgs/Hr.Double Combustion Chambers
Single Combustion Chamber	Small, Cheap,10-20kgs/Hr.
Three Combustion Chambers(Optional)	3 Ranked for high risk waste
Pet Cremation Equipment	For Pet(small/big) Cremation Business
Animal Incineration Equipment	For additional creature incineration
	Items/Model

The forecasted feedstock loads, and daily loading rates are generally summarized as:

• Mixed general, clinical and incinerable hazardous wastes with a wide range of calorific values and densities. The wastes will consist of 100% biomedical wastes.

• Wastes either small enough to fit within a 60 litre waste sack or broken up or shredded to less than 300mm in size.

• Operation on a daytime shift basis, 5 days per week.

TS100(PLC)

TS150(PLC)	TS300(PLC)	TS500(PLC)	Burn Rate (Typical )	100 kg/hour
150 kg/hour	300 kg/hour	500 kg/hour	Control Mode	PLC Auto.
PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber	1200L
1500L	2000L	3000L	Internal Dimensions	120x100x100cm
150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber	600L
750L	1000L	1500L	Smoke Filter Chamber	Dry Scrubber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode	Manual
Manual	Manual	Manual	Voltage	220V
220V	220V	220V	Power	1.38Kw
1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)	Ave.20.4
Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)	Ave.24.5
Ave.29	Ave.39.6	Ave.52.8	Temperature Monitor	Yes
Yes	Yes	Yes	Temperature Protection	Yes
Yes	Yes	Yes	Oil Tank	200L
300L	500L	500L	Chimney	10Meter
10Meter	14Meter	14Meter	Chimney Type	Stainless Steel
Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature	800℃–1000℃
800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature	1000℃-1200℃
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time	2.0 Sec.
2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight	6000kg
8500kg	11000kg	16000kg	External Dimensions	260x150x180cm
300x160x190cm	400x210x300cm	450x210x300cm

The proposed incinerators shall be able to be completely packed into a series of 20ft export standard sea containers.

“Warranty will be as per the UNOPS ‘contracts for the provision of goods’ under section 4.5 of the ‘general conditions of contract’ 4.5 WARRANTIES: Unless otherwise specified in the Contract, in addition to and without limiting any other warranties, remedies or rights of UNOPS stated in or arising under the Contract, the Contractor warrants and represents that:

4.5.1 The goods, including all packaging and packing thereof, conform to the specifications of the Contract, are fit for the purposes for which such goods are ordinarily used and for any purposes expressly made known in writing in the Contract, and shall be of even quality, free from faults and defects in design, material, manufacturer and workmanship;

4.5.2 If the Contractor is not the original manufacturer of the goods, the Contractor shall provide UNOPS with the benefit of all manufacturers’ warranties in addition to any other warranties required to be provided under the Contract;

4.5.3 The goods are of the quality, quantity and description required by the Contract, including when subjected to conditions prevailing in the place of final destination;

The goods are free from any right of claim by any third-party, including claims of infringement of any 4.5.4intellectual property rights, including, but not limited to, patents, copyright and trade secrets;

4.5.5 The goods are new and unused;

4.5.6 All warranties will remain fully valid following any delivery of the goods and for a period of not less than one (1) year following acceptance of the goods by UNOPS in accordance with the Contract;

4.5.7 During any period in which the Contractor’s warranties are effective, upon notice by UNOPS that the goods do not conform to the requirements of the Contract, the Contractor shall promptly and at its own expense correct such non-conformities or, in case of its inability to do so, replace the defective goods with goods of the same or better quality or, at its own cost, remove the defective goods and fully reimburse UNOPS for the purchase price paid for the defective goods; and,

4.5.8 The Contractor shall remain responsive to the needs of UNOPS for any services that may be required in connection with any of the Contractor’s warranties under the Contract.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-21

Waste Burning and Incineration Combustion Process

Posted on August 22, 2021 by admin

The combustion, or burning, of solid waste proceeds through a succession of stages. Water is first driven in the unburned waste by heat produced from material burning nearby or from an auxiliary burner. As the waste pops up, carbon and other substances are released and converted to burnable gases. This is known as gasification. These gases are then able to mix with oxygen. If the temperature inside the burn chamber is high enough and maintained for a long enough period of time, the hot gases are completely converted to water vapour and carbon dioxide, which is then discharged into the atmosphere. If the temperature inside the burn chamber isn’t high enough and the burn time is too brief, complete conversion of the burnable gases does not occur and visible smoke is released into the atmosphere. Another consequence of burning at low temperatures is that the creation of pollutants that weren’t initially present in the waste. This process is known as de novo synthesis. Dioxins, furans and other complex chemical pollutants can be formed through this process.

Ash made from combustion takes the kind of fly ash or bottom ash. Fly ash is the fine particles carried away in the kind of smoke while bottom ash is the course non-combustible and unburned material that remains after the burn is complete. The type and amount of pollutants in the fly and bottom ash depend upon what waste is burnt and completeness of the combustion process.

The completeness of combustion is determined by all of the following factors:

Temperature

The temperature generated is a function of the heating value of the waste and auxiliary fuel, incinerator or burn unit layout, air supply and combustion control. Generally, temperatures that exceed 650oC with a holding time of 1-2 seconds can cause complete combustion of most food and other common household waste. Segregation of waste is required when using methods that don’t routinely attain these temperatures. Dual chamber incinerators, which are designed to burn complex mixtures of waste, hazardous waste and biomedical waste, must provide a temperature greater than 1000oC and a holding time of at least one second to ensure complete combustion and minimize dioxin and furan emissions. When these high temperatures and holding times are attained, waste will be completely burnt and ash, smoke and pollutant concentrations will be reduced.

Because exhaust gas temperatures vary from ambient to over 1000°C every time a batch waste incinerator is used, optional air pollution control systems with evaporative cooling towers and scrubbers are seldom recommended. However, it may be necessary to employ these systems with large continuous feed incinerators if further cleaning of exhaust gas is required by regulatory authorities.

Holding Time

Total combustion takes time. Holding time, otherwise known as retention or residence time, is the duration of time available to ensure the complete mixing of air and fuel, and therefore the total burning of waste. Low temperatures, low heating values of the waste and reduced turbulence require that the holding time be increased to complete the combustion process. This will aid in attaining the high temperatures at which waste could be completely burned. The amount of mixing is influenced by the form and size of the burn chamber and the way the air is injected. Passive under-fire ventilation attained during open burning does not result in sufficient turbulence for the burning of a wide variety of waste. Also, it’s important not to overfill the burn chamber as airflow could be blocked and the amount of turbulence further decreased. The more advanced incineration designs provide effective turbulence throughout the forced introduction of air directly into hot zones.

Composition of the Waste

The heating value, wetness and chemical properties of the waste has an effect on the combustion process and the pollutants that are found in the resulting smoke and ash. The higher the burn temperature, holding time and turbulence that are attained, the less impact the composition of the waste has on completeness of the burn.

Composition of the Waste

The heating value, wetness and chemical properties of the waste affect the combustion process and the pollutants that are contained in the resulting smoke and ash. The higher the burn temperature, holding time and turbulence that are achieved, the less effect the composition of the waste has on completeness of the burn.

Medical Waste Incinerator Ts50 PLC

Posted on August 21, 2021 by admin

Basic Info.

Model NO.:china medical waste incinerators manufacturer

Export Markets:Global

Product Description

Technology Respond(FAQ)

Q: What’s kind of waste can utilize within this equipment? A: This equipment for medical waste, pet animal, Municipal waste, live squander. Prohibit any volatile and radiation substance, liquid waste and gas waste. GB18484-2001.

Q: Treatment capacity A: Average Capacity calculated by medical waste(lower calorific power (L. C. P): 3.0TH Kcal/Kg per hour), not mean any waste material. The animal/pet combustion speed around 2/3 of average capacity.

Clover incinerator use time daily to 24 hours. Between each feed/combustion time, you will find approximately 0.5-1 hours cooling time and time for feeding waste. Actual combustion time daily is about 16 hours. The life of incinerator between 5-10 year according to use.

Generally, we proposition little lab, little clinic use capability under 20 kgs per hour. When incinerator use in hospital, please calculate the waste output capacity around 2kgs per people each day. If there are 200 sickbed at the hospital, that's mean you need one incinerator capacity around 400kgs each day, change to capacity per hour is around 30-40 kgs per hour. According the operation time daily, waste material, budget, development, etc, you may use capacity from 30-50 kgs per hour incinerator. *How to calculate Animal Cremation Burn Rate: 2/3 of the medical waste.

Q: Testing and Assembly A: We supply all documents and incinerators easy to installation and operation. Client can send people come to our factory to find out installation and operation. Generally, we don’t send engineer to local site if not request. The dispatch cost is additional according to order. The second combustion chamber: 1000-1200 centi degree.

Q: Incinerator Control Mode A: Default Control manner is common control instance. PLC mode according to order and model.

Q: Operation and maintenance costs A: Operation cost according to fuel consumption rate and power/staff, etc.

Annual around $500-$1000USD per year maintenance according model, use situation.

One individual can service 02 device incinerators. China animal cremation, china incinerator supplier, cloverincinerator, garden incinerator, hog incinerator, infectious waste pyrolysis machine china, The team must have basic electrician knowledge to operate/inspect/maintaince incinerator/burner/blower according to performance user guider, and know risk of medical waste to protect worker self with essential protection element.

Q: The Residency time in secondary combustion chamber A: 02 sec.

Q: The Residency time in secondary combustion chamber
A: 02 sec.

Items/Model	TS10(PLC)	TS20(PLC)	TS30(PLC)	TS50(PLC)	TS100(PLC)
Burn Rate	10 kg/hour	20 kg/hour	30 kg/hour	50 kg/hour	100 kg/hour
Feed Capacity	20kg	40kg	60kg	100kg	200 kg
Control Mode	PLC	PLC	PLC	PLC	PLC
Combustion Chamber	100L	210L	330L	560L	1200L
Internal Dimensions	50x50x40cm	65x65x50cm	75x75x60cm	100x80x70cm	120x100x100cm
Secondary Chamber	50L	110L	180L	280L	600L
Smoke Filter Chamber	Yes	Yes	Yes	Yes	Yes
Feed Mode	Manual	Manual	Manual	Manual	Manual
Voltage	220V	220V	220V	220V	220V
Power	0.5Kw	0.5Kw	0.5Kw	0.7Kw	0.7Kw
Oil Consumption (kg/hour)	5.4–12.6	7.8–16.3	10.2–20	12.1–24	14–28
Gas Consumption (m3/hour)	6.2–11.4	8–15.7	9.8–20	9.9–26.1	10–32.2
Temperature Monitor	Yes	Yes	Yes	Yes	Yes
Temperature Protection	Yes	Yes	Yes	Yes	Yes
Oil Tank	100L	100L	100L	100L	200L
Feed Door	30x30cm	45x40cm	55x50cm	70x55cm	80x60cm
Chimney	3Meter	3Meter	5Meter	5Meter	10Meter
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Gross Weight	1500kg	2200kg	3000kg	4500kg	6000kg
External Dimensions	140x90x120cm	160x110x130cm	175x120x140cm	230x130x155cm	260x150x180cm

pet incinerator for sale

Posted on August 21, 2021 by admin

pet incinerator for sale: The pet cremation equipment humanized design with movable platform, small space covers for modern pet cremation business owner all over the world.

※Main Feature:
— Double or Three Combustion Chamber
— Double Italy Burner
–Burning Rate: 18-120kgs per hour or more
–Combustion Chamber: 0.4M3-1.5M3 or more
※Optional Function/Parts/Material/Burning Rate:
— Movable Platform Feeding Door
— Stainless Steel Chimney
— Dry Smoke Filter Chamber
— 3-Section Wet Scrubber System
— Chimney Height Custom Made
— Upgrade/Downgrade Burning Rate

Items/Model	A360	A600	A900	A1200
Burning Rate *animal	20 kgs/Hr.	20 kgs/Hr.	30 kgs/Hr.	60 kgs/Hr.
Feed Capacity *animal	30 kgs	50 kgs	80 kgs	100 kgs
Equipment Weight	2300 kgs	3000 kgs	4000 kgs	4300 kgs
Primary Chamber (Liters)	360	600	900	1200
Secondary Chamber (Liters)	200	200	300	500
External Dimensions (cm)	145x90x175	175 x 100 x 180	200x160x230	220x180x360
Internal Dimensions (cm)	100x60x60	130 x 70 x 65	120x90x85	130x100x90
Oil Tank(Liters)	200	200	300	300
Door Opening (cm)	48 x 60	50 x 60	62 x 80	55 x 80
Chimney (M)	5	5	5	10
Chimney Type	Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel
Secondary Chamber	YES	YES	YES	YES
Mix-Combustion Chamber	YES	YES	YES	YES
Smoke Filter Chamber	YES	YES	YES	YES
Combustion Fuel	Oil/Gas	Oil/Gas	Oil/Gas	Oil/Gas
Residency Time	2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.
Temperature Monitoring	YES	YES	YES	YES
1st. Chmaber Temperature	800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃
2nd. Chmaber Temperature	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃

Medical waste Control pdf

Posted on August 21, 2021 by admin

The Incinerator units shall be designed to last in operation in a tropical environment for a minimum period of 10 years if the specified maintenance schedule is followed. All metal surfaces (except combustion chamber internal fittings) shall be either galvanized, enameled, painted or otherwise treated against atmospheric and process induced corrosion,Medical waste management pdf.

The incinerator combustion chamber(s) should be designed for easy maintenance of all internal parts including the refractory and insulation. Materials used in the individual parts of the incinerator shall be heat resistance and also be protected against oxidation, corrosion, etc.

The incinerator shell shall be made of mild steel with an adequate thickness for small units of between 3-6mm and larger units 5-10 mm depending on the construction part and painted externally with heat resistant aluminum paint suitable to withstand 250° C. The outside surface temperature of the incinerator casing should not exceed 50° C above ambient temperature and shall include a safety mesh around all hot surfaces. Cold face refractory lining of calcium silicate or superior material, minimum thickness 100 mm.

	Three Combustion Chambers(Optional)
3 Ranked for high risk waste	Pet Cremation Equipment
For Pet(small/big) Cremation Business	Animal Incineration Equipment
For other animal incineration
Items/Model	TS100(PLC)
TS150(PLC)	TS300(PLC)

TS500(PLC)

Burn Rate (Average)	100 kg/hour	150 kg/hour	300 kg/hour	500 kg/hour
Control Mode	PLC Auto.	PLC Auto.	PLC Auto.	Combustion Chamber
1200L	1500L	2000L	3000L	Internal Dimensions
120x100x100cm	150x100x100cm	170x120x100cm	210x120x120cm	Secondary Chamber
600L	750L	1000L	1500L	Smoke Filter Chamber
Dry Scrubber	Dry Scrubber	Dry Scrubber	Dry Scrubber	Feed Mode
Manual	Manual	Manual	Manual	Voltage
220V	220V	220V	220V	Power
1.38Kw	1.69Kw	2.57Kw	4.88Kw	Diesel Oil Consumption (kg/hour)
Ave.20.4	Ave.24.2	Ave.33	Ave.44	Natural Gas Consumption (m3n/hour)
Ave.24.5	Ave.29	Ave.39.6	Ave.52.8	Infection Monitor
Yes	Yes	Yes	Yes	Temperature Protection
Yes	Yes	Yes	Yes	Oil Tank
200L	300L	500L	500L	Chimney
10Meter	10Meter	14Meter	14Meter	Chimney Type
Stainless Steel	Stainless Steel	Stainless Steel	Stainless Steel	1st. Chamber Temperature
800℃–1000℃	800℃–1000℃	800℃–1000℃	800℃–1000℃	2nd. Chamber Temperature
1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	1000℃-1200℃	Residency Time
2.0 Sec.	2.0 Sec.	2.0 Sec.	2.0 Sec.	Gross Weight
6000kg	8500kg	11000kg	16000kg	External Dimensions
260x150x180cm	300x160x190cm	400x210x300cm	450x210x300cm
			2021-02-21	450x210x300cm

All incinerators shall meet the following emission and operating standards:

• Combustion efficiency (C.E.) shall be at least 99.0%

• The combustion efficiency shall be computed as follows:

o C.E = (CO2 X 100) / (%CO2 +%CO)

Suitably designed pollution control devices such as scrubbers, filters or electrostatic precipitators, shall be installed/retrofitted with the incinerator to achieve emission limits.”

“Each unit shall include a complete vertical exhaust and stack system, including the following features:

• Steel construction.

• Refractory lining in the lower section.

• The exit height of the stack shall be not less than a range of 3-12 metres above ground level depending on the capacity of the incinerator unit.

• The diameter of the stack shall be selected by the Contractor to deliver an exhaust exit velocity of not less than 10 metres per second vertically upwards when at full scale operation.

• An emission stack sampling port shall be included immediately above the secondary chamber.

CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.

1. Medical Waste Incinerator(Containerized Mobile Incinerator｜Top Loading Incinerator)

2. Auto Roll Air Filter for Clean Room

2021-02-21

	Items/Model
TS75	Picture
	Principle
Solid Waste Incineration	Burn Rate
Average 75 kg/hour	Feed Capacity
Average 100kg	Control Mode
PLC(Programmable Logic Controller Incinerator)	Combustion Chamber
600L	Internal Dimensions
100x60x100cm	Secondary Chamber
300L	Smoke Filter Chamber
Yes	Feed Mode
Manual	Voltage
220V	Power
3.0Kw	Oil Consumption (L/Hour)
15-20	Natural Gas Consumption (m3n/hour)
**	Temperature Monitor
Digital Screen	Temperature Protection
Yes	Oil Tank
250L	Feed Door
Dia.55cm	Chimney
6 Meters	Chimney Sort
Stainless Steel	1st.
800℃–1000℃	2nd.
Gross Weight	2500kg
External Dimensions	2080x1100x3840cm(without chimney)
HICLOVER Incinerator/Parts Range	Main Feature