EPA Postpones Community Meeting on Ethylene Oxide Emissions in Westlake, La.

 

Image

EPA Postpones Community Meeting on Ethylene Oxide Emissions in Westlake, La.

 

CONTACT: [email protected]
 

(DALLAS – Aug. 30, 2021) The U.S. Environmental Protection Agency (EPA) will postpone a planned a virtual community meeting to provide residents of Westlake, Louisiana, with information about ethylene oxide (EtO) out of concern for community safety. EPA will reschedule the meeting at a later date to allow full participation from community members and other stakeholders.  

###

 

EPA  @epa

Image

 

If you would rather not receive future communications from Environmental Protection Agency, let us know by clicking here.
Environmental Protection Agency, 1201 Elm Street, Suite 500, Dallas, TX 75270 United States

incinerador

  1. l) Facilidad de uso y mantenimiento
  2. i) La unidad debe ser fácil de aprender a usar, operar y mantener.
  3. ii) La unidad debe tener instrucciones de funcionamiento abreviadas incluidas en o con la unidad (por ejemplo, en una tarjeta laminada

adjunto a la unidad).

iii) La unidad debe ser fácil de limpiar, desinfectar y / o esterilizar, según corresponda. iv) La unidad debe estar diseñada para

fácil acceso a piezas reparables.

  1. m) Herramientas especiales de mantenimiento, repuestos y consumibles
  2. i) Donde sea necesario o requerido, el proveedor debe incluir cualquier herramienta especial requerida para el mantenimiento del

equipo propuesto

  1. ii) Cada equipo debe ser suministrado con los repuestos recomendados.
  • El nuevo incinerador se utilizará para quemar principalmente papel, pero también cigarrillos confiscados por la aduana.
  • El diseño se basará en 1200 bolsas por año, bolsas marrones estándar para quemar “BANNER”, Código de producto

971-0003, capacidad 75 litros;

  • Se desconoce la cantidad de cigarrillos, pero no se espera que sea el factor decisivo, al menos en términos de

capacidad.

Medical Waste Management System



Items/Model

TS50(PLC)

Picture

Principle

Medical Waste Incineration 

Burn Rate

50-100 kg/hour

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

560L

Internal Dimensions

100x80x70cm

Secondary Chamber

280L

Smoke Filter Chamber

Gas Flue Washing System incineration of medical waste

Feed Mode

Manual

Voltage

220V

Power

4.0 Kw

Oil Infection (kg/hour)

Typical 16.9

Gas Consumption (m3/hour)

Typical 20.2

Infection Monitor

Digital Display

Temperature Protection

Yes

Oil Tank

100L

Feed Door

70x55cm

Chimney

15Meter

Chimney Sort

S.Steel

1st.

1000℃-1200℃

Residency Time

2.0 Sec.

Three Combustion Chambers(Optional)

3 Chambers for high risk waste

Pet Cremation Equipment

For Pet(small/big) Cremation Business

Animal Incineration Equipment


Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/ 

For additional creature incineration

Nanjing Clover Medical Technology Co.,Ltd.

ü BIO-Medical/Hospital Waste Incinerator Modular Package Form, free standing unit consisting of (Primary chamber, Secondary Chamber, stake, controller and gas flue washing machine ) how can a waste to energy plant work

ü Diesel Oil And GAS Fired Burners (Dual)

ü Stainless Steel stack for strength

ü Burning capability: 50-60kgs of waste ruined per hour. 

ü Average ash residue: 3 to 4 percent

ü Operating Temperature 850°C to maximum 1320°C or better:

ü Upto 1150°C in a secondary chamber

ü Residency Time in Secondary Chamber of two minutes

ü Thick refractory liner & insulation more than 200mm rated to 1600°C in primary chamber retains warmth, increasing efficacy

ü Separate doors for loading and ash removal

ü Loading door for maximum operator protection for immediate heat exposure

ü Burner with temperature activated modulating control

ü Dual HT Thermocouples: Allow independent control of Primary and secondary temperatures through the control panel

ü Stress mill with modulating air controller

ü Stainless Steel cladding for optimum heat retention, cool touch and hygiene controller

ü Rapid, efficient and complete medical waste disposal

ü Safe use manage

ü high-quality liner and insulatio,management of hazardous waste

ü PLC touch screen, double burner controller, preset burn times and blower

ü Temperature monitoring

ü Programmable digital temperature controls for total combustion

ü Secondary burner temperature activated controlling control

ü Fast pre-heat and persistent high temperature functionality

ü Heavy duty lock: Made by us to ensure tight locking chamber with no air openings. Simple to open and shut

ü Low energy intake rates

ü 2 efficient high efficiency burners for better fuel saving to save a hour fuel burning price.

Items/Model

TS100(PLC)

TS150(PLC)

TS300(PLC)

TS500(PLC)

Burn Speed (Typical )

100 kg/hour

150 kg/hour

300 kg/hour

500 kg/hour

Control Mode

PLC Auto.


PLC Auto.

PLC Auto.

PLC Auto.

Combustion Chamber

1200L

1500L

2000L

3000L

Internal Dimensions

120x100x100cm

150x100x100cm

170x120x100cm

210x120x120cm

Secondary Chamber

600L

750L

1000L

1500L

Smoke Filter Chamber

Dry Scrubber

Dry Scrubber

Dry Scrubber

Dry Scrubber

Feed Mode

Manual

Manual

Manual

Manual

Voltage

220V

220V

220V

220V

Power

1.38Kw

1.69Kw

2.57Kw

4.88Kw

Diesel Oil Consumption (kg/hour)

Ave.20.4

Ave.24.2

Ave.33

Ave.44

Natural Gas Consumption (m3n/hour)

Ave.24.5

Ave.29

Ave.39.6

Ave.52.8

Infection Monitor

Yes

Yes

Yes

Yes

Temperature Protection

Yes

Yes

Yes

Yes

Oil Tank

200L

300L

500L

500L

Chimney

10Meter

10Meter

14Meter

14Meter

Chimney Type

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

1st. Chamber Temperature

800℃–1000℃

800℃–1000℃

800℃–1000℃

800℃–1000℃

2nd. Chamber Temperature

1000℃-1200℃

1000℃-1200℃

1000℃-1200℃

1000℃-1200℃

Residency Time

2.0 Sec.

2.0 Sec.

2.0 Sec.

2.0 Sec.

Gross Weight

6000kg

8500kg

11000kg

16000kg

External Dimensions

260x150x180cm

300x160x190cm

400x210x300cm

450x210x300cm

2021-02-23

11000kg

16000kg

External Dimensions

260x150x180cm

300x160x190cm

400x210x300cm

450x210x300cm




 CE Certification Pass

HICLOVER Solution for Fighting COVID-19 with CE Certification.
 
1. Medical Waste Incinerator(Containerized Mobile Incinerator|Top Loading Incinerator)
 
2. Auto Roll Air Filter for Clean Room

 

2021-02-23



Justice Department and EPA Reach Clean Air Settlement with Gear Box Z for Selling Defeat Devices

 

Image

After Successfully Obtaining a Preliminary Injunction, Justice Department and EPA Reach Clean Air Act Settlement with Gear Box Z for Selling Defeat Devices

August 30, 2021

Contact: Joshua Alexander, 415-972-3258, [email protected]

SAN FRANCISCO – The U.S. Environmental Protection Agency (EPA) Arizona-based Gear Box Z (GBZ) has agreed to stop manufacturing and selling aftermarket automotive products widely known as “defeat devices,” that, when installed, bypass, defeat, or render inoperative EPA-certified emission controls on motor vehicles thereby increasing emissions and harming air quality.

In January 2020, the United States sued GBZ, which manufactured and sold thousands of defeat devices, alleging that these devices violated the Clean Air Act (CAA). In March 2021, the court found that the United States would likely prevail on the merits of its case, that GBZ’s products are defeat devices, and issued a preliminary injunction ordering GBZ to immediately halt the illegal sale of the devices. In its decision, the court found that the continued selling of these defeat devices would cause irreparable harm by increasing motor vehicle emissions that impair human health and the environment.  

“This lawsuit and settlement show that the United States will not permit the manufacture and sale of illegal devices that disable emission controls and thereby harm public health and that we will vigorously enforce the CAA prohibition of such devices,” said Assistant Attorney General Todd Kim of the Justice Department’s Environment and Natural Resources Division (ENRD).

“Defeat devices in automobiles and trucks can significantly increase emissions of hazardous air pollutants,” said Acting Assistant Administrator Larry Starfield for EPA’s Office of Enforcement and Compliance Assurance. “Businesses manufacturing and selling illegal aftermarket defeat devices should take note that this is a priority enforcement focus for EPA and we will continue to actively investigate these violations of the Clean Air Act.”

“Today’s settlement will prevent the future sale of thousands of aftermarket defeat devices per year,” said Deborah Jordan, EPA’s Acting Regional Administrator for the Pacific Southwest. “As acknowledged by the court when granting the United States’ motion for a preliminary injunction, increased nitrogen oxides and particulate matter pollution stemming from defeat devices cause ‘irreparable harm’ and threaten the health of everyone, especially those with pre-existing health conditions, children, and the elderly. Although Gear Box Z’s business was small, the illegal usage of its defeat devices caused substantial excess emissions.”

The settlement prohibits GBZ from manufacturing and selling any defeat devices; it also bars GBZ and its owners from selling or transferring any intellectual property associated with these products, providing technical support for these products, and investing in or obtaining revenue from other companies’ manufacture and sales of defeat devices. Under the settlement, GBZ and its owners will pay a civil penalty of $10,000, which was based on their financial situation.

Tampering with diesel-powered vehicles by installing defeat devices can cause large amounts of nitrogen oxide (NOx) and particulate matter emissions, both of which contribute to serious public health problems. EPA expects that GBZ’s defeat devices will cause excess NOx and particulate matter emissions over the anticipated remaining life of the diesel pickup trucks equipped with them. By stopping the manufacture and sale of these products, this settlement will prevent harmful emissions from diesel trucks that, if outfitted with GBZ’s products, would pollute far more than the regulations allow. Such emissions can cause premature death, aggravation of respiratory and cardiovascular disease, aggravation of existing asthma, acute respiratory symptoms, chronic bronchitis, and decreased lung function.

Numerous studies also link diesel exhaust to increased incidence of lung cancer. Respiratory issues disproportionately affect families, especially children, living in underserved communities overburdened by pollution. Stopping the sale and use of defeat devices will help prevent harmful air pollution that exacerbates the health effects of pollutant exposures.

Stopping the manufacture, sale, and installation of defeat devices on vehicles and engines used on public roads as well as on nonroad vehicles and engines is a priority for EPA. To learn more, visit: https://www.epa.gov/enforcement/national-compliance-initiative-stopping-aftermarket-defeat-devices-vehicles-and-engines.

The consent decree for this settlement was lodged in the U.S. District Court for the District of Arizona and is subject to a 30-day public comment period and final court approval. A copy of the decree, and information on submitting comments will be available on the Department of Justice website at: www.justice.gov/enrd/consent-decrees.  

For more information on this settlement: https://www.epa.gov/enforcement/gear-box-z-inc-clean-air-act-settlement

If you suspect someone is manufacturing, selling, or installing illegal defeat devices, or is tampering with emission controls, tell the EPA by writing to tampering
@epa.gov
.

Learn more about EPA’s Pacific Southwest Region. Connect with us on Facebook and on Twitter.

EPA  @epa

Image

 

If you would rather not receive future communications from Environmental Protection Agency, let us know by clicking here.
Environmental Protection Agency, 75 Hawthorne Street, San Francisco, CA 94105 United States

Um problema inesperado de infraestrutura de ebola: resíduos

Os pacientes com esse vírus debilitante produzem 440 galões de lixo hospitalar diariamente, incluindo instrumentos, jalecos, luvas, fluidos corporais, lençóis, colchões e muito mais. É uma quantidade substancial de lixo hospitalar em qualquer situação, mas é especialmente desanimador neste caso porque precisa ser descartado com extrema cautela, para evitar o risco de propagação da infecção. O que você faz com um problema como o lixo Ebola? Porque você não quer jogá-lo no lixo.

Surpreendentemente, diz Bausch, os Estados Unidos realmente enfrentam problemas maiores quando se trata de descartar com segurança os resíduos de Ebola, que são simplesmente queimados em grandes fossas na África: “Nos Estados Unidos, é claro, estamos um tanto comprometidos com soluções de alta tecnologia , que de certa forma são um pouco mais problemáticos em termos de tratamento de todos esses resíduos, e precisamos de autoclaves ou incineradores que possam lidar com esse tipo de coisa. Não é a inativação real que é particularmente difícil; é apenas o processo de levar os resíduos da linha de frente do atendimento e da interação com os pacientes com segurança para o local onde podem ser incinerados ou autoclavados ”.

O problema nos Estados Unidos é ironicamente agravado pelo maior acesso aos cuidados médicos e pela maior qualidade dos serviços médicos disponíveis. Nos Estados Unidos, os pacientes são tratados por equipes médicas com acesso a um grande volume de suprimentos que usam para proteção, incluindo máscaras, jalecos, botas e luvas, além de desinfetantes e outras ferramentas. Além disso, os pacientes recebem extensas intervenções médicas que geram resíduos como agulhas, tubos, esparadrapo, bolsas vazias de soro e muito mais. O próprio cuidado que ajudou a maioria dos poucos pacientes de Ebola nos Estados Unidos a vencer a doença contribuiu para a enorme quantidade de resíduos gerados, destacando um buraco crítico na infraestrutura médica dos EUA – enquanto os hospitais africanos podem não ter os suprimentos e pessoal necessários para fornecer ajuda aos pacientes com ebola, eles estão pelo menos preparados para lidar com o lixo.

O CDC acaba de emitir diretrizes para ajudar os médicos e administradores a decidir sobre como lidar com os resíduos do Ebola, mas o The New York Times observa que muitas instalações não têm autoclave e incinerador, capacidade para lidar com resíduos médicos nesta escala. Alguns estados proíbem totalmente a queima de lixo hospitalar, ou barraram a incineração de lixo de Ebola, levando ao transporte de lixo através das fronteiras estaduais para instalações que podem tratá-lo, o que representa seus próprios riscos; com cada quilômetro adicionado ao transporte, há um risco maior de espalhar doenças para comunidades não expostas anteriormente.

Surpreendentemente, os defensores da queima do lixo vêm de cantos surpreendentes. Ambientalistas como Allen Hershkowitz, cientista sênior do National Resources Defense Council, apontam que: “Não há poluente que saia de um incinerador de lixo que seja mais perigoso do que o vírus Ebola. Quando você está lidando com riscos patogênicos e biológicos, às vezes a coisa mais segura a fazer é a combustão. ”

O argumento em defesa da incineração pode ser reforçado pelo fato de que as empresas de resíduos hospitalares se especializam em incineração de alta eficiência com equipamentos projetados para minimizar e reter os subprodutos da combustão, reduzindo consideravelmente a poluição geral. Os temores sobre o ebola, em vez de preocupações ambientais ou de saúde pública genuínas, estão conduzindo a decisão de pressionar contra a incineração de resíduos de ebola em muitas regiões, mas, eventualmente, os Estados Unidos terão que enfrentar os fatos: os resíduos crescentes que se acumulam nas instalações onde Pacientes com ebola recebem tratamentos que devem ser descartados com segurança e prontamente.

por: http://www.care2.com/causes/an-unexpected-ebola-infrastructure-problem-waste.html

팬 필터 장치와 함께 제공

2019-05-13 공기 정화 장비 405 조회수


제품 소개

FFU는 자체 전원 및 필터링 기능을 갖춘 모듈식 터미널 공기 공급 장치입니다. 송풍기는 FFU 상부에서 공기를 빨아들여 HEPA로 여과하며, 여과된 깨끗한 공기는 0.45m/s±20%의 풍속으로 전체 공기출구면에 고르게 토출됩니다.

FFU는 모듈식으로 연결하여 사용할 수 있으므로 FFU는 클린룸, 클린 작업 테이블, 클린 생산 라인, 조립된 클린룸 및 수백 개의 로컬 애플리케이션에서 널리 사용됩니다.

제품 사용법:

FFU는 클린룸, 클린 작업 테이블, 클린 생산 라인, 조립된 클린룸 및 수백 개의 로컬 애플리케이션에서 널리 사용됩니다. 다양한 크기와 다양한 청정도 수준의 클린룸 및 미세 환경에 고품질의 깨끗한 공기를 제공할 수 있습니다. 반도체, 전자, LCD, 하드 디스크, 광학, 생물 산업 등과 같은 청정도가 높은 경우에 적합하며 독특한 장점과 합리적인 가격으로 시장을 빠르게 점유합니다.

제품 특징:

다양한 방법으로 속도를 제어할 수 있습니다.

낮은 운영 전력 소비, 비용 절감;

공기 덕트 전환 시스템이 내장되어 소음과 압력 손실을 줄이고 팬 효율을 개선합니다.

독일 EBM 오리지널 후방 경사 원심 팬은 높은 풍량을 제공할 수 있습니다. 높은 정압 조건, 작업 수명은 50,000시간 이상입니다.

청정도가 Class1-1000인 청정실에서 사용하기에 적합합니다.

매우 깨끗한 생산 라인으로 조립하는 데 특히 적합하며 공정 요구에 따라 단일 장치로 배열하거나 여러 장치를 직렬로 연결하여 100단계 조립 라인을 형성할 수 있습니다.

출고 전 제품은 미국연방규격 209E에 의거하여 먼지 입자 계수기를 사용하여 하나하나 검사 및 검사하여 품질을 보증합니다.

표준 도면

기술적인 매개변수

추가 콘텐츠 URL: www.ecolead.cn Tel: 025-57138032

  • 自带风机过滤单元

    팬 필터 장치와 함께 제공

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 人员风淋室-直通型

    개인 에어샤워 스루형

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 货淋室-自动门型

    카고샤워실 – 자동문형

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 人员风淋室-节能型

    직원 에어 샤워 에너지 절약

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 吹淋型传递窗

    블로우샤워식 전사창

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 无菌层流型传递窗

    멸균 층류 전달 창

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 高效送风口

    효율적인 공기 배출구

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • BFU风机过滤单元

    BFU 팬 필터 유닛

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 层流罩

    층류 후드

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 袋进袋出BIBO

    BIBO에서 가방을 넣고 빼기

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 水平式洁净工作台

    수평 클린 벤치

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 垂直式-洁净工作台

    수직 청소 작업대

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 称量罩

    계량 후드

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 洁净衣柜

    깨끗한 옷장

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 空气过滤箱

    에어 필터 박스

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 普通型传递窗

    일반 송금 창구

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 卷绕式专用过滤棉

    래핑된 특수 필터면

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 人员风淋室-L型转角式

    퍼스널 에어샤워 L자형 코너타입

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 人员风淋室-隧道型

    개인용 에어샤워터널형

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 洁净棚

    깨끗한 창고

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

Đã ký hợp đồng cho bộ lọc không khí cửa chớp trong giai đoạn hai của dự án Gu'an BOE của Công ty Xây dựng Thứ tư Kỹ thuật Hệ thống Điện tử Trung Quốc

2019-05-18 Tin tức công ty209 lượt xem

Trước thềm Lễ hội Thuyền Rồng, công ty đã có một loạt tin vui, khi liên tiếp ký kết hàng chục bộ lọc gió cửa cuốn cho các loại hình công nghiệp như nhà máy xử lý nước thải, phòng xử lý khí tươi, xử lý khí thải công nghiệp. Sau khi hợp tác giai đoạn đầu tiên của dự án Gu’an BOE với Cục Kỹ thuật Xây dựng Trung Quốc vào năm ngoái, công ty chúng tôi đã ổn định và ổn định, và đã ký kết giai đoạn hai của hợp đồng mua sắm bộ lọc màn trập với China Power Four. Công ty chúng tôi bao gồm một loạt các dịch vụ như cung cấp, vận hành tại chỗ, phí đào tạo,… Rất mong ngày càng có nhiều công ty bảo vệ môi trường, đơn vị thi công hợp tác với công ty chúng tôi.

URL nội dung khác: www.ecolead.cn Tel: 025-57138032

Pet Crematorium

Basic Info.

Export Markets:Global

Additional Info.

Trademark:clover
Origin:Clover

Product Description

We want to refresh or change incinerator with new one the incinerator contain 3 units each unit 400kg/h, if u interest to make job with as pls contact me to send u drawing and details. (Baghdad ) 
Our hospitals require 3 X Medical Waste Incinerator Units (designed to 
Burn medical waste load capacity of 50kg/hr, with calorific values 
Ranging from 2, 300 kJ. Kg to 30, 000 kJ/kg at a designed thermal rate 
Of 1, 440, 000 kJ/hr. 
I was browsing through your website and noted that Model: YZ-50 or 
YD-50 might be the the desired (specified) incinerator unit. Please 
Find attached animal incinerators and other waste, animal incinerators and other waste. De, animal incinerators costs, animal incinerators manufacturers, animal incinerators price, our incinerator specifications. 
I kindly request you to send me a quotation of your Medical Waste 
Incinerator Units, detailed specs and features plus freight costs from 
Your location to Port Moresby, Papua New Guinea. 
MEDICAL WASTE INCINERATOR SPECIFICATIONS 
Capacity (4000 kg/day). 
The unit should have the following features: 
* Automatic feeding 
* Automatic ash / leftovers removal 
* Flue gas filtration system. 
* The technical & financial offer should include installation & testing and staff training. 
***The offer should be itemized. 
IMPORTANT INFORMATION: 
1. Emission standards: ( EU ) 
2. Waste type: Hazardous Medical Waste 
3. Approximate moisture content: Max. 30% 
4. Glass content: Max. 15% 
5. Building Roof Height: 8 meters 
6. Height of chimney above roof (required): At least 3 meters 
7. Fuel to be used: No. 2 ( diesel ) ( Fuel specifications attached ) 
8. Power: 380 V, 3 phase 
9. Space available inside the existing building: (Bidders should visit the building to choose the best location for installation coordinating with university engineers) 
10. Waste filled in (max. 70X120 cm ) polyethylene bags (Amman ) 
I am looking at purchasing 10-17 medical waste incinerators. Please could you give me your best price and latest catalogue for the following

Items/Model TS10(PLC) TS20(PLC) TS30(PLC) TS50(PLC) TS100(PLC)
Burn Rate 10 kg/hour 20 kg/hour 30 kg/hour 50 kg/hour 100 kg/hour
Feed Capacity 20kg 40kg 60kg 100kg 200 kg
Control Mode PLC PLC PLC PLC PLC
Combustion Chamber 100L 210L 330L 560L 1200L
Internal Dimensions 50x50x40cm 65x65x50cm 75x75x60cm 100x80x70cm 120x100x100cm
Secondary Chamber 50L 110L 180L 280L 600L
Smoke Filter Chamber Yes Yes Yes Yes Yes
Feed Mode Manual Manual Manual Manual Manual
Voltage 220V 220V 220V 220V 220V
Power 0.5Kw 0.5Kw 0.5Kw 0.7Kw 0.7Kw
Oil Consumption (kg/hour) 5.4–12.6 7.8–16.3 10.2–20 12.1–24 14–28
Gas Consumption (m3/hour) 6.2–11.4 8–15.7 9.8–20 9.9–26.1 10–32.2
Temperature Monitor Yes Yes Yes Yes Yes
Temperature Protection Yes Yes Yes Yes Yes
Oil Tank 100L 100L 100L 100L 200L
Feed Door 30x30cm 45x40cm 55x50cm 70x55cm 80x60cm
Chimney 3Meter 3Meter 5Meter 5Meter 10Meter
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel Stainless Steel
1st. Chamber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
2nd. Chamber Temperature 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree 800degree–1000degree
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Gross Weight 1500kg 2200kg 3000kg 4500kg 6000kg
External Dimensions 140x90x120cm 160x110x130cm 175x120x140cm 230x130x155cm 260x150x180cm

Incinérateur

Informations de base.

pour Animal: Incinérateur
Forme posologique: Incinérateur
Type: Incinérateur
Fonction: Incinérateur
Marchés d’exportation: mondiaux

Information additionnelle.

Marque Déposée: CLOVER MEDICAL

Description du produit

Nanjing Clover Medical Technology Co., Ltd. est l’un des principaux fabricants d’incinérateurs de déchets en Chine. Nous sommes un fabricant local et l’un des plus grands exportateurs de Chine. L’équipement technique d’incinérateur pyrolytique est le principal traitement des déchets dans le monde entier, pour les déchets médicaux, l’incinération animale, la crémation des animaux domestiques et autres déchets solides. La capacité de 10 kg / h. Jusqu’à 500 kg / heure, jusqu’à 6 tonnes par jour. Actuellement, nous fournissons différentes séries pour les besoins des clients locaux et concevons un incinérateur mis à jour avec notre technologie de pointe. La conception mise à jour de notre gamme d’incinérateurs en fait l’un des plus rentables au monde.

Nous sommes l’un des plus grands fabricants et exportateurs d’incinérateurs de déchets de Chine. L’incinérateur pyrolytique technique est la principale méthode de traitement des déchets dans le monde entier, pour les déchets médicaux, l’incinération animale, la crémation d’animaux domestiques et autres déchets solides. Actuellement, nous fournissons des incinérateurs de petits trèfles, des incinérateurs de trèfle 500, des incinérateurs de trèfle co., Ltd., Des incinérateurs de trèfle ltd, des fabricants d’incinérateurs de trèfle en Chine, des incinérateurs de trèfle et des incinérateurs à grande échelle selon les exigences des clients locaux et nous concevons un incinérateur mis à jour avec notre technologie de pointe.
Nanjing Clover Medical Technology Co., Ltd. Tél: + 86-25-8461 0201 Fax: + 86-25-8461 0406 Ajouter: RM. 7411, No.58 Yunjin Rd., Nanjing, Chine 210019

Articles / modèle YD-10C YD-20C YD-30C YD-50C
Taux de combustion (kg / heure) 10 kg / heure 20 kg / heure 30 kg / heure 50 kg / heure
Capacité d’alimentation (kg) 40 kilogrammes 40 kilogrammes 50 kilogrammes 80 kilogrammes
Poids de l’équipement 1200 kilogrammes 1200 kilogrammes 1800 kilogrammes 2200 kilogrammes
Chambre primaire (litres) 200 200 250 400
Chambre secondaire (litres) 140 140 140 140
Dimensions extérieures (cm) 170 x 140 x 160 170 x 140 x 160 170 x 140 x 190 180 x 160 x 200
Dimensions internes (cm) 55 x 55 x 65 55 x 55 x 65 55 x 55 x 85 70 x 70 x 85
Réservoir d’huile (litres) 50 100 100 150
Ouverture de porte (cm) 38 x 48 38 x 48 38 x 48 45 × 55
Cheminée (M) 5 5 5 5
Type de cheminée Acier inoxydable Acier inoxydable Acier inoxydable Acier inoxydable
Chambre secondaire OUI OUI OUI OUI
Chambre de mélange-combustion OUI OUI OUI OUI
Chambre de filtre à fumée OUI OUI OUI OUI
Combustible de combustion Gaz de pétrole Gaz de pétrole Gaz de pétrole Gaz de pétrole
Temps de résidence 2,0 sec. 2,0 sec. 2,0 sec. 2,0 sec.
Surveillance de la température OUI OUI OUI OUI

개인 에어샤워 스루형

2019-05-13 공기 정화 장비 414 조회수

제품 소개

에어샤워는 사람을 정화하고 오염된 공기가 청정지역으로 유입되는 것을 방지하기 위한 장치로 고속의 청정 공기 흐름을 이용하여 의복 표면이나 사람의 물질에 묻은 먼지를 제거합니다. 동시에 외부 공기가 크린룸을 오염시키는 것을 방지하는 에어락룸 또는 저급 클린룸에서 고급 클린룸으로의 기능도 겸하고 있습니다.

직선형 에어샤워실은 가장 많이 사용되는 디자인 중 하나로 2개의 문이 분리되어 모양이 심플하고 아름답습니다. 사람들이 출입할 때 교차 오염을 방지하기 위해.

제품 특징:

에어샤워실의 공기는 1차 필터를 통해 팬에 의해 정압박스로 압축되어 고효율 필터로 정화되고 노즐에서 고속으로 분출되어 사람과 몸에 붙은 먼지와 운반물의 표면 및 정화되지 않은 공기를 방지 정화 구역으로 들어가십시오.  

제품 특징:

* 제품 구조가 견고하고 설치가 쉽습니다.
*
PLC 제어 시스템은 안정적이고 효율적이며 정전이 발생하면 에어 샤워 도어가 자동으로 잠금 해제됩니다.
*
초기 고효율 2단계 여과, 고효율 효율 최대 99.99% 효율@0.3um

* 높은 풍속 360도 조절 가능한 스테인레스 스틸 노즐

* 초기 및 효율적인 장치 교체 용이
*
크린룸 전용 정화램프 장착
*
조정 가능한 분사 시간(10-99초)
*
독일 브랜드 도어 클로저 포함.

* 신뢰할 수 있는 인터록 기능
*
비상 정지 버튼 장착

표준 도면

기술적인 매개변수:

세부정보 표시

360도 방향 조절이 가능한 스테인리스 스틸 노즐

독일 유명 브랜드 도어 클로저

높은 정압 및 대풍량 모터

미국 HV 수입 여과지 고효율 필터

추가 콘텐츠 URL: www.ecolead.cn Tel: 025-57138032

  • 自带风机过滤单元

    팬 필터 장치와 함께 제공

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 人员风淋室-直通型

    개인 에어샤워 스루형

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 货淋室-自动门型

    카고샤워실 – 자동문형

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 人员风淋室-节能型

    직원 에어 샤워 에너지 절약

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 吹淋型传递窗

    블로우샤워식 전사창

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 无菌层流型传递窗

    멸균 층류 전달 창

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 高效送风口

    효율적인 공기 배출구

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • BFU风机过滤单元

    BFU 팬 필터 유닛

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 层流罩

    층류 후드

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 袋进袋出BIBO

    BIBO에서 가방을 넣고 빼기

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 水平式洁净工作台

    수평 클린 벤치

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 垂直式-洁净工作台

    수직 청소 작업대

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 称量罩

    계량 후드

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 洁净衣柜

    깨끗한 옷장

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 空气过滤箱

    에어 필터 박스

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 普通型传递窗

    일반 송금 창구

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 卷绕式专用过滤棉

    래핑된 특수 필터면

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 人员风淋室-L型转角式

    퍼스널 에어샤워 L자형 코너타입

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 人员风淋室-隧道型

    개인용 에어샤워터널형

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형

  • 洁净棚

    깨끗한 창고

    와인딩 에어 필터 제조 업체, 난징 클린 셰드, 에어 샤워 실, 자동 롤링 커튼 유형