County scraps plans for waste-to-energy incinerator

The Board of County Commissioners broke plans Thursday for a regional waste-to-energy incinerator, preferring to haul the county’s waste to a landfill using a short-term contract instead. Commissioners Paul Smith and Billy Shreve cast the dissenting votes to maintain the job on the dining table while the county investigates its options.

“It is absolutely no charge to the county to maintain these options open,” Smith stated. “To do away with these choices is mad.”

Terminating the undertaking will not cost the county any money as the Northeast Maryland Waste Disposal Authority, a quasi-governmental service that helps the county meet its trash disposal needs, will cover the $500,000 conclusion fee. Any remaining funds after this payment will be divided between Frederick County and Carroll County, which was once a partner in the undertaking. These funds are out of payments the authority has obtained from Wheelabrator after the service contract has been executed in 2010.

But, Young said he saw no purpose in voting to maintain plans for an incinerator, which could burn trash to electricity, open because County Executive-elect Jan Gardner intended to scrap the facility after accepting office Dec. 1.

“In the event the county executive-elect says finishing the job, what are you going to do within the next 30 to 60 days to convince her not to?” Young stated.

County Attorney John Mathias stated Gardner held the power to determine the fate of this incinerator job, not the County Council, if a decision was not made Thursday.

“I think you should terminate the entire thing,” Gardner testified in front of the plank and approximately 100 people gathered at Winchester Hall, garnering some applause.

The board unanimously voted in favor of transporting the county’s trash to an out-of-state landfill for $50.95 per ton using a highest last-minute contract.

After considering five suggestions, including three out-of-state prices and 2 waste-to-energy facilities outside Maryland, the commissioners narrowed their choices between two sidewalks with varying contracts.

Commissioners previously leaned toward the first option, which offered contracts stretching 25 years at a mean of $54.97 a ton, although that cost can escalate annually using the consumer price index and fuel rates. However, the board unanimously chose the second option, which Gardner also favored.

Around 30 individuals testified in front of the board regarding the incinerator job, using a bit more than half in favor of scrapping it along with the remainder advocating for maintaining the job on the table to consider it more deeply.

“The incinerator is a waste of energy, a waste of resources (also ) a waste of cash,” Brunswick resident Ellis Burruss testified. “It’d be good not to waste any more time .”

Other residents noted the proposed location of this incinerator, near Monocacy National Battlefield, could ruin the playground ’s beauty and tourism.

However, resident Greg Brown voiced his support for a regional incinerator, supposing it had been more environmentally friendly than the other choices commissioners were contemplating.

“The top landfills … are three or more times more pollutant than a waste-to-energy facility,” Brown stated.

Another resident stated Europe has been constructing waste-to-energy centers for many years without the unwanted effects that many have brought up.

Jim Warner, CEO of the Lancaster County Solid Waste Management Authority in Pennsylvania, pitched a proposition for hauling the county’s trash, but the commissioners chose to proceed with an undisclosed out-of-state landfill using a Brief contract.

“I was actually with this (incinerator project), but with all the energy costs and Carroll County falling out … I’m not,” Delauter said, echoing the ideas of Young and Gray.

by: http://besttopics.net/link/214519_county-scraps-plans-for-waste-to-energy-incinerator-politics-and-government-frederick-news-post

by: http://besttopics.net/link/214519_county-scraps-plans-for-waste-to-energy-incinerator-politics-and-government-frederick-news-post

pet incinerators

pet incinerators

All kindly pets owners hope their lovely dog or cat be in heaven after they leave us. We understand the special bond between pet and owner and believe that it should never be forgotten. Losing a pet can be devastating and we built our business so families can remember their pets forever. pet incinerators are cremation equipment for family dead pets, including cat, dog and small pig, etc.

Items/Model A360 A600 A900 A1200
Burning Rate *animal 20 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 60 kgs/Hr.
Feed Capacity *animal 30 kgs 50 kgs 80 kgs 100 kgs
Equipment Weight 2300 kgs 3000 kgs 4000 kgs 4300 kgs
Primary Chamber (Liters) 360 600 900 1200
Secondary Chamber (Liters) 200 200 300 500
External Dimensions (cm) 145x90x175 175 x 100 x 180 200x160x230 220x180x360
Internal Dimensions (cm) 100x60x60 130 x 70 x 65 120x90x85 130x100x90
Oil Tank(Liters) 200 200 300 300
Door Opening (cm) 48 x 60 50 x 60 62 x 80 55 x 80
Chimney (M) 5 5 5 10
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chmaber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃

Medical Waste Incinerator for covid19 waste 100-150-300-500kgs per hour



Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/ 

Nanjing Clover Medical Technology Co.,Ltd.

● Double Combustion Chambers
All waste incinerator design with double combustion chamber. High Temperature, Smoke Treatment,No black smoke, Environmentally friendly. 
● Containerized Mobile Incinerators
The incinerator mounted in ISO Container before leave factory, free-installation, no incineration house build construction,movable by truck. 
● Family Pets Dog&Cat Cremation
Special design with movable platform, combustion chamber material and custom made for pets crematory business. 
● Installation and Commissioning
Clover’s engineers install,train for most of the region and free-cost train in our factory. 


Items/Model

TS100(PLC)

TS150(PLC)

TS300(PLC)

TS500(PLC)

Burn Speed (Typical )

100 kg/hour

150 kg/hour

300 kg/hour

500 kg/hour

Control Mode

PLC Auto.

PLC Auto.

PLC Auto.

PLC Auto.

Combustion Chamber

1200L

1500L

2000L

3000L

Internal Dimensions

120x100x100cm

150x100x100cm

170x120x100cm

210x120x120cm

Secondary Chamber

600L

750L

1000L

1500L

Smoke Filter Chamber

Dry Scrubber

Dry Scrubber

Dry Scrubber

Dry Scrubber

Feed Mode

Manual

Manual

Manual

Manual

Voltage

220V

220V

220V

220V

Electricity

1.38Kw

1.69Kw

2.57Kw

4.88Kw

Diesel Oil Consumption (kg/hour)

Ave.20.4

Ave.24.2

Ave.33

Ave.44

Natural Gas Consumption (m3n/hour)

Ave.24.5

Ave.29

Ave.39.6

Ave.52.8

Infection Monitor

Yes

Yes

Yes

Yes

Temperature Protection

Yes

Yes

Yes

Yes

Oil Tank

200L

300L

500L

500L

Optional Optional Optional Optional

Smoke Wet Scrubbers

Chimney

10Meter

10Meter

14Meter

14Meter

Chimney Sort

Stainless Steel

Stainless Steel

Stainless Steel

Stainless Steel

1st. Chamber Temperature

800℃–1000℃

800℃–1000℃

800℃–1000℃

800℃–1000℃

2nd. Chamber Temperature

1000℃-1200℃

1000℃-1200℃

1000℃-1200℃

1000℃-1200℃

Residency Time

2.0 Sec.

2.0 Sec.

2.0 Sec.

2.0 Sec.

Gross Weight

6000kg

8500kg

11000kg

16000kg

External Dimensions

260x150x180cm

300x160x190cm

400x210x300cm


hospital incinerator ash
HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

450x210x300cm

 



Medical Waste Incineration Model TS20(PLC) Wet Scrubber (Water Spary tower)



Phone: +86-13813931455(whatsapp/wechat)
Website: http://www.hiclover.com/ 

Nanjing Clover Medical Technology Co.,Ltd.

Items/Model

TS20(PLC)

Picture

 

Principle

Medical Waste Incineration 

Burn Rate

Average 20 kg/hour

Feed Capacity

Average 40kg/feeding

Control Mode

PLC(Programmable Logic Controller Incinerator)

Combustion Chamber

210L

Internal Dimensions

65x65x50cm

Secondary Chamber

110L

Smoke Filter

Wet Scrubber (Water Spary tower)

Feed Mode

Manual

Voltage

380V

Power

5Kw

Oil Infection (kg/hour)

7.8–16.3

Gas Consumption (m3/hour)

8–15.7

Infection Monitor

Digital Screen

Temperature Protection

Yes

Oil Tank

100L

Feed Door

45x40cm

Chimney

5Meter

Chimney Sort

Stainless Steel

1st.

800℃–1000℃

2nd. Chamber Temperature

1000℃-1200℃

Residency Time

2.0 Sec.

Gross Weight

4000kg

External Dimensions





HICLOVER Solution for Fighting COVID-19, Medical Waste Incinerator

160x110x130cm(Incinerator)

 



animal crematory equipment

animal crematory equipment

the animal crematory equipment function like other incinerators, but there are also some difference, some key point is door opening(we can feed the pet), oil or gas operation cost, moveable feeding door, smoke enviromental friendly, if we can collect ash, easy to use it, good service from pet incinerator manufacturer,etc.

Items/Model A360 A600 A900 A1200
Burning Rate *animal 20 kgs/Hr. 20 kgs/Hr. 30 kgs/Hr. 60 kgs/Hr.
Feed Capacity *animal 30 kgs 50 kgs 80 kgs 100 kgs
Equipment Weight 2300 kgs 3000 kgs 4000 kgs 4300 kgs
Primary Chamber (Liters) 360 600 900 1200
Secondary Chamber (Liters) 200 200 300 500
External Dimensions (cm) 145x90x175 175 x 100 x 180 200x160x230 220x180x360
Internal Dimensions (cm) 100x60x60 130 x 70 x 65 120x90x85 130x100x90
Oil Tank(Liters) 200 200 300 300
Door Opening (cm) 48 x 60 50 x 60 62 x 80 55 x 80
Chimney (M) 5 5 5 10
Chimney Type Stainless Steel Stainless Steel Stainless Steel Stainless Steel
Secondary Chamber YES YES YES YES
Mix-Combustion Chamber YES YES YES YES
Smoke Filter Chamber YES YES YES YES
Combustion Fuel Oil/Gas Oil/Gas Oil/Gas Oil/Gas
Residency Time 2.0 Sec. 2.0 Sec. 2.0 Sec. 2.0 Sec.
Temperature Monitoring YES YES YES YES
1st. Chmaber Temperature 800℃–1000℃ 800℃–1000℃ 800℃–1000℃ 800℃–1000℃
2nd. Chmaber Temperature 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃ 1000℃-1200℃